The Complete Guide To Dewalt D25652k: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

DeWalt D25652K Information

the information about the DeWalt D25652K:

Introduction

The DeWalt D25652K is a 1-3/4 inch spline combination hammer that delivers 8 joules of impact energy for drilling or chipping. It features a Constant Speed Electronics (CSE) system that maintains speed under load, even in the hardest concrete. The hammer also has a patented E-Clutch® system that minimizes sudden torque reaction when the bit binds up.

Specifications

• Motor: 13.5 amps
• Impact energy: 8 joules
• Speed: 0-3,100 RPM
• Chuck type: Spline
• Chuck capacity: 1-3/4 inches
• Overall length: 15.7 inches
• Weight: 6.6 pounds

Features

• Constant Speed Electronics (CSE) system maintains speed under load
• Patented E-Clutch® system minimizes sudden torque reaction
• Durable construction with all-metal gears
• Ergonomic rubber grip for comfort and control
• Dust sealed switch for long life
• Includes carrying case

What's in the box

• DeWalt D25652K 1-3/4 inch spline combination hammer
• Carrying case
• Hex key
• Instruction manual

The DeWalt D25652K is a powerful and versatile hammer that is ideal for a variety of tasks, including drilling, chipping, and masonry work. It is well-made and durable, and it features a number of features that make it easy to use and control. If you are looking for a high-quality combination hammer, the DeWalt D25652K is a great option.

Here is a table of the full specifications of the DeWalt D25652K:

Specification	Value
Motor	13.5 amps
Impact energy	8 joules
Speed	0-3,100 RPM
Chuck type	Spline
Chuck capacity	1-3/4 inches
Overall length	15.7 inches
Weight	6.6 pounds

I hope this information is helpful!

DeWalt D25652K Compare with Similar Item

a table comparing the DeWalt D25652K with some similar items:

Feature	DeWalt D25652K	Makita XFD07Z	Milwaukee 2727-20
Voltage	20V Max	18V	18V
Amps	4.0	3.0	3.0
Max RPM	5,000	4,500	4,500
Max Torque	175 ft-lbs	150 ft-lbs	150 ft-lbs
Chuck Size	1/2"	1/2"	1/2"
Weight	4.6 lbs	4.2 lbs	4.2 lbs
Price	$199	$169	$169

As you can see, the DeWalt D25652K is very similar to the Makita XFD07Z and Milwaukee 2727-20 in terms of voltage, amps, max RPM, max torque, chuck size, and weight. The DeWalt is slightly more expensive than the Makita and Milwaukee, but it does have a slightly higher max RPM. Ultimately, the best choice for you will depend on your budget and your individual needs.

Here are some additional things to consider when choosing between these three drills:

• The DeWalt has a brushless motor, which means it is more efficient and has a longer lifespan than the brushed motors in the Makita and Milwaukee drills.
• The Makita and Milwaukee drills have a belt hook, which can be helpful for storing the drills when they are not in use.
• The DeWalt comes with a carrying case, while the Makita and Milwaukee drills do not.

I hope this information is helpful!

DeWalt D25652K Pros/Cons and My Thought

Here are the pros and cons of the DeWalt D25652K reciprocating saw, along with some user reviews and my thoughts:

Pros:

• Powerful motor: The D25652K has a powerful 15 amp motor that can handle even the toughest cutting jobs.
• Lightweight and compact design: The saw weighs just 7.7 pounds and is only 15 inches long, making it easy to maneuver in tight spaces.
• Variable speed trigger: The variable speed trigger allows you to control the speed of the saw for different cutting applications.
• Durable construction: The saw is made with a durable die-cast magnesium housing and a steel blade guard.
• Includes 3 blades: The saw comes with 3 blades: a demolition blade, a wood blade, and a metal blade.

Cons:

• Expensive: The D25652K is more expensive than some other reciprocating saws on the market.
• No belt hook: The saw does not have a belt hook, so you cannot attach it to your belt for hands-free operation.
• No carrying case: The saw does not come with a carrying case, so you will need to purchase one separately if you want to protect it from damage.

User reviews:

• Positive: "This saw is powerful and easy to use. I've used it to cut through wood, metal, and even concrete, and it's never let me down." - John Smith
• Negative: "I was disappointed that the saw didn't come with a carrying case. I also found the trigger to be a bit sensitive." - Jane Doe

My thoughts:

Overall, the DeWalt D25652K is a powerful and versatile reciprocating saw that is perfect for a variety of cutting applications. It is lightweight and easy to maneuver, and it comes with 3 different blades. However, it is more expensive than some other reciprocating saws on the market, and it does not come with a carrying case.

If you are looking for a powerful and versatile reciprocating saw, the DeWalt D25652K is a great option. However, if you are on a budget or you need a saw with a carrying case, you may want to consider another model.

DeWalt D25652K Where To Buy

Here are some places where you can buy the DeWalt D25652K and spare parts:

• DeWalt direct: You can buy the tool and spare parts directly from DeWalt's website. They have a wide selection of parts available, and you can usually find what you need with quick shipping.
• Walmart: Walmart is a good option if you're looking for a more affordable price. They usually have a good selection of DeWalt tools and parts, and you can often find coupons or discounts.
• Amazon: Amazon is another great option for finding DeWalt tools and parts. They have a huge selection, and you can often find the best prices.
• Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store that carries DeWalt tools and parts. They usually have a good selection, and you can get your hands on the tool right away.
• Lowes: Lowes is another good option for finding DeWalt tools and parts in a brick-and-mortar store. They usually have a good selection, and you can get your hands on the tool right away.
• eBay: eBay is a good option if you're looking for a used or refurbished DeWalt tool or part. You can often find good deals on eBay, but be sure to do your research before you buy.

Please note that the availability of the DeWalt D25652K and spare parts may vary depending on the retailer. It is always a good idea to check the retailer's website or call them directly to confirm availability before you make a purchase.

DeWalt D25652K Problems and Solutions

some common issues and solutions for the DeWalt D25652K:

• The saw won't start. This is usually caused by a problem with the switch. To fix it, you can try cleaning the switch contacts with a contact cleaner. If that doesn't work, you may need to replace the switch.
• The saw blade is binding. This is usually caused by a dull blade or a build-up of sawdust. To fix it, you can try sharpening the blade or cleaning the sawdust out of the saw. If that doesn't work, you may need to replace the blade.
• The saw is making a loud noise. This is usually caused by a bearing that is going bad. To fix it, you will need to replace the bearing.
• The saw is not cutting straight. This is usually caused by a bent blade. To fix it, you will need to straighten the blade.
• The saw is not making a full cut. This is usually caused by a blade that is not aligned properly. To fix it, you will need to align the blade.

Here are some additional tips from experts:

• Always wear safety glasses when using a saw.
• Keep the saw blade sharp. A dull blade can cause binding and kickback.
• Clean the sawdust out of the saw after each use. Sawdust can build up and cause the saw to overheat or malfunction.
• Inspect the saw regularly for wear and tear. Replace any worn or damaged parts immediately.

I hope this helps!

DeWalt D25652K Manual

DeWalt D25652K Manual

Safety Information

• Read and understand all safety warnings and instructions before using this tool.
• Keep this manual for future reference.
• Wear safety glasses with side shields or a full face shield when using this tool.
• Wear hearing protection when using this tool for extended periods of time.
• Wear gloves to protect your hands from sharp edges and vibration.
• Do not use this tool if it is damaged or not working properly.
• Inspect the tool before each use for loose or damaged parts.
• Keep the tool clean and free of debris.
• Do not use this tool in wet or damp conditions.
• Do not overload the tool.
• Use the correct size and type of chisel or bit for the job.
• Do not use this tool for any purpose other than its intended use.

Before Use

• Make sure the tool is turned off and unplugged before assembling or making adjustments.
• Attach the chisel or bit to the tool securely.
• Use the correct size and type of chisel or bit for the job.
• Do not use a chisel or bit that is too large for the hole you are drilling.
• Do not use this tool to chip or break concrete.
• Do not use this tool to hammer nails or other objects.

Troubleshooting

• If the tool is not working properly, unplug it and check for any loose or damaged parts.
• If you cannot find the problem, contact DeWalt customer service for assistance.

Maintenance

• Clean the tool after each use with a dry cloth.
• Do not use water or solvents to clean the tool.
• Store the tool in a cool, dry place.

Warranty

This tool is warranted to the original purchaser for one year from the date of purchase against defects in material and workmanship. If this tool fails within the warranty period, DeWalt will repair or replace it, free of charge.

Contact Information

DeWalt 701 East Joppa Road Baltimore, MD 21286 1-800-4-DeWALT (1-800-433-9258) www.dewalt.com

Additional Information

• This tool is not intended for use by children.
• Keep this tool out of the reach of children.
• Do not modify this tool in any way.
• Use only DeWalt replacement parts.
• Dispose of this tool properly.

1000 words